- Cancer 101: Cancer Explained
- Guide to Breast Cancer
- Skin Cancer Risks
- Find a local Doctor in your town
- Radon Facts*
- EPA Recommendations for Radon
- Overview About Radon
- How Does Radon Get Into Your Home?
- How to Test Your Home for Radon
- Short-term Testing for Radon
- Long-term Testing for Radon
- How to Use a Radon Test Kit
- What Your Test Results Mean
- Radon and Home Sales
- Radon in Water
- How to Lower the Radon Levels in Your Home
- The Risk of Living With Radon
- Radon Risk Charts
- Radon Myths
- For Further Information
Quick GuideHome Health Pictures Slideshow: Surprising Sources of Indoor Air Pollution
How to Test Your Home for Radon
You can't see radon, but it's not hard to find out if you have a radon problem in your home. All you need to do is test for radon. Testing is easy and should only take a few minutes of your time.
The amount of radon in the air is measured in "picocuries per liter of air," or "pCi/L." There are many kinds of low-cost "do-it-yourself" radon test kits you can get through the mail and in some hardware stores and other retail outlets. If you prefer, or if you are buying or selling a home, you can hire a qualified tester to do the testing for you. You should first contact your state radon office about obtaining a list of qualified testers. You can also contact a private radon proficiency program for lists of privately certified radon professionals serving your area.
There are Two General Ways to Test for Radon: Testing is easy and should only take a few minutes of your time.
Short-Term Testing for Radon
The quickest way to test is with short-term tests. Short-term tests remain in your home for two days to 90 days, depending on the device. "Charcoal canisters," "alpha track," "electretion chamber," "continuous monitors," and "charcoal liquid scintillation" detectors are most commonly used for short-term testing. Because radon levels tend to vary from day to day and season to season, a short-term test is less likely than a long-term test to tell you your year-round average radon level. If you need results quickly, however, a short-term test followed by a second short-term test may be used to decide whether to fix your home (see Home Sales).
Long-Term Testing for Radon
Long-term tests remain in your home for more than 90 days. "Alpha track" and "electret" detectors are commonly used for this type of testing. A long-term test will give you a reading that is more likely to tell you your home's year-round average radon level than a short-term test.
EPA Recommends the Following Testing Steps:
Step 1. Take a short-term test. If your result is 4 pCi/L or higher, take a follow-up test (Step 2) to be sure.
Step 2. Follow up with either a long-term test or a second short-term test:
- For a better understanding of your year-round average radon level, take a long-term test.
- If you need results quickly, take a second short-term test.
The higher your initial short-term test result, the more certain you can be that you should take a short-term rather than a long-term follow up test. If your first short-term test result is more than twice EPA's 4 pCi/L action level, you should take a second short-term test immediately.
Step 3. If you followed up with a long-term test: Fix your home if your long-term test result is 4 pCi/L or more. If you followed up with a second short-term test: The higher your short-term results, the more certain you can be that you should fix your home. Consider fixing your home if the average of your first and second test is 4 pCi/L or higher. (see also Home Sales)